One of our Tandy Model 100 computers had become relegated to controlling the buzzer for indicating shift changes, breaks and lunch. We used the signal for controlling the cassette interface to turn the buzzer on and off. A twenty line BASIC program was used to check the time against a schedule that was hard coded into the program.
Invariably for one reason or another this computer would forget the program. Either Bob or I would then run over and type the program in from memory, set the clock and get it running again. I cannot even count the number of times I did this while I worked there, but it was really no big deal because after a few times it only took a minute.
So here was have this computer which was originally purchased for more than $1000 and we were using it to blow a whistle 8 times a day. Nowaways this would be completely appropriate because you can buy a computer on a chip with all the power of the Model 100 for about $30.
Showing posts with label tandy model 100. Show all posts
Showing posts with label tandy model 100. Show all posts
Friday, April 23, 2010
Thursday, February 25, 2010
The Job Tracking System in BASIC
It was time to put my new SBASIC tool to good use. Bob wanted a new tracking system to replace the old TRS-80 one. We decided to use one of the Kaypro II machines for this. I'm a little fuzzy on whether Bob started this one and handed it off to me, or if I was the developer from the get-go. Regardless, this project was a showcase for what could be done with the BASIC programming language.
This was a pretty easy application to build. There were a dozen or so departments on the factory floor. Each time a new job was ordered there were some essentials entered like job #, customer name, board type, due date, etc. and these were just stored in a simple random access file. Several times a day a young lady from Brazil named Danusa would make rounds collecting information about jobs and where they were in factory. Then she would come back and enter this information. Status reports would get printed out.
C.F.C. specialized in quick turnaround orders. Anything we could do to improve information about important rush orders was critical. A more timely tracking system was in our sights. We took one of the Tandy Model 100 portables and bought a barcode wand for it. A data collection program for it was written in BASIC. This would be used to collect the locations of all the jobs. I wrote a program in the tracking application for printing 3 of 9 bar code on label stock using an Epson compatible dot matrix printer. These had job numbers on them and we stuck them on the job bill of materials sheets that went with each order. Then we printed large bar codes for each department.
So now all Danusa had to do was go to a department, scan the bar code on the department sign, and then go to each bill of materials sheet and scan in the job number bar code. Then she would repeat this with each department. When this was done (and it was a lot faster than using a pen and clipboard) all she had to do was come back and we would read the information into the Kaypro II using an RS-232 cable and we would just suck that information into the tracking system and print the reports.
It really stands out to me that this sort of very useful application programming was easily achievable by a high school graduate with a knowledge of BASIC. For a good while we used this system to expedite manufacturing. End users used to do this kind of thing a lot more back then and I'm sure that Bob could easily have written this himself if he were so inclined and it he weren't so busy running the company. People should take more interest in programming because it's fun, it teaches important thinking skills and even untrained programmers can accomplish real productivity enhancements.
This was a pretty easy application to build. There were a dozen or so departments on the factory floor. Each time a new job was ordered there were some essentials entered like job #, customer name, board type, due date, etc. and these were just stored in a simple random access file. Several times a day a young lady from Brazil named Danusa would make rounds collecting information about jobs and where they were in factory. Then she would come back and enter this information. Status reports would get printed out.
C.F.C. specialized in quick turnaround orders. Anything we could do to improve information about important rush orders was critical. A more timely tracking system was in our sights. We took one of the Tandy Model 100 portables and bought a barcode wand for it. A data collection program for it was written in BASIC. This would be used to collect the locations of all the jobs. I wrote a program in the tracking application for printing 3 of 9 bar code on label stock using an Epson compatible dot matrix printer. These had job numbers on them and we stuck them on the job bill of materials sheets that went with each order. Then we printed large bar codes for each department.
So now all Danusa had to do was go to a department, scan the bar code on the department sign, and then go to each bill of materials sheet and scan in the job number bar code. Then she would repeat this with each department. When this was done (and it was a lot faster than using a pen and clipboard) all she had to do was come back and we would read the information into the Kaypro II using an RS-232 cable and we would just suck that information into the tracking system and print the reports.
It really stands out to me that this sort of very useful application programming was easily achievable by a high school graduate with a knowledge of BASIC. For a good while we used this system to expedite manufacturing. End users used to do this kind of thing a lot more back then and I'm sure that Bob could easily have written this himself if he were so inclined and it he weren't so busy running the company. People should take more interest in programming because it's fun, it teaches important thinking skills and even untrained programmers can accomplish real productivity enhancements.
Saturday, February 13, 2010
A Cornucopia of Computers
So I joined the engineering group at C.F.C. Our job was to write and debug CNC programs for the Excellon drilling and routing machines. Most of the programs were written using WordStar on Osborne-1 and Kaypro CP/M machines. We did not use hard drives to do this work, and the final medium of storage was punched paper tape. Yes, really! That was the format the machines used, and we had a storage library for keeping the tapes.
There was one Macintosh in engineering for special purposes, but here again I never used it.
There was a TRS-80 used for managing job tracking in the factory. It had the standard silver expansion box and three floppy drives.
Accounting had an Epson PC clone (or was it a Leading Edge Model D?), and there were a couple of Tandy Model 100 laptops that look like Alan Kay's Dynabook prototype.
Things were about to get interesting.
There was one Macintosh in engineering for special purposes, but here again I never used it.
There was a TRS-80 used for managing job tracking in the factory. It had the standard silver expansion box and three floppy drives.
Accounting had an Epson PC clone (or was it a Leading Edge Model D?), and there were a couple of Tandy Model 100 laptops that look like Alan Kay's Dynabook prototype.
Things were about to get interesting.
Subscribe to:
Posts (Atom)
